24V Monitor with Rear Camera System for Bus / Truck Including Installation

Description

Supplied and installed 24V Monitor with Rear Camera System for Bus / Truck.
Price can vary depending on the size of Truck/Bus

This affordable large 7″ colour high resolution LCD monitor comes with a bracket fitting for mounting on any suitable flat surface using the supplied adhesive pad, or it can be flush mounted into a suitable vehicle panel if available. The display settings are adjustable for maximum picture quality.

It is perfect for large vehicles or where a larger display is preferred.

7” high resolution commercial colour LCD monitor
• Suitable for 12 to 24 volt vehicles (note: if fitting to a 24 volt vehicle the camera must be powered from the LCD monitor the camera CANNOT be connected directly into the vehicle’s 24 volt power supply)
• Wide screen display switchable16:9 or 4:3
• Strong unobtrusive pedestal mount (height/swivel/tilt adjustable)
• Sunshade for the monitor
• 2x 4-pin inputs for up to two cameras (includes 12 volt power to the cameras)
• The camera image can be horizontally and/or vertically flipped so the monitor can be mounted four ways – upright at the front of the vehicle upright at the back roof mounted at the front or roof mounted at the back of the vehicle
• Adjustable display settings
• On screen display (OSD) with remote or push button control
• Switch between camera views with easy push button on remote or screen
• If using with a reversing camera when the vehicle is in reverse gear the LCD monitor will automatically switch to display the camera image even if the monitor is not turned on
• Heavy duty 4-pin connectors – female plugs
• Will accept both PAL and NTSC format cameras
• Dimensions:
Screen with hood: 175 x 115 x 43mm
Height with bracket: approx 115 – 155mm (height/swivel/tilt adjustable)
Bracket foot: 120 x 90mm